Recording

Wavestore enables a wide range of camera technologies to be recorded simultaneously. In addition audio inputs can be recorded and linked to a specific camera input.

Analogue, IP and megapixel cameras from the industries manufacturers are supported.

IP and megapixel cameras can be recorded in M-JPEG, MxPEG, MPEG-4 or H.264 protocols. (The Wavestore design can record from multiple cameras, each using a differnt protocol).

The details below define the analogue camera recording capability which is available either as Wavelet of H.264 compression technologies.

• Wavelet compression for analogue inputs – image by image capture and storage
• Simultaneously record, playback, archive, search and transmit
• 3 recording sections:– Prime, TimeLapse, Alarm (provides internal mirroring)
• PAL and NTSC standards supported
  
• Selectable resolutions per recording section:
  Full (720 x 576), CIF (360 x 288), QCIF (180 x 144) in PAL
  Full (704 x 485), CIF (352 x 240), QCIF (176 x 120) in NTSC
• Variable recording rate by camera & section:
• Up to 50 pps per input, total of 800 pps per Wavestore (PAL)
• Up to 60 pps per input, total of 960 pps per Wavestore (NTSC)
• Large interval time-lapse recording
• Mix of different hardware for tailored system – inputs, recording rates, storage time
• Variable compression ratio (per camera in selected models)
• Variable disk allocations for each camera and section
• Auto delete when disk full
• Auto delete by time
• Scheduled recording; assignable to recording per camera per section